ShoplionSTEEL heat treatment procedure for all the blades
- lionSTEEL does not have the heat treatment equipment inside its facility, for this reason we are supported by a certified third part.
- Third part is: Trattamenti Termici Todesco SAS. ISO 9001:2015 (first issue 06 August 2007)
- Third part generates a Quality Control Certificate every run of heat treatment done.
- lionSTEEL can make a second HRC control inside the company with its own machine.
- All the HRC results must stay inside the fork of our data sheet.
- Every steel used by lionSTEEL has its own data sheet.
- The values represent, for us, the right hardness/elasticity balance.
- Value forks on the steels data sheets are the following ones:
| C: Carbon | Cr: Chromium | Mn: Manganese | Si: Silicon | Mo: Molybdenum | V: Vanadium | Nb: Niobium | W: Wolfram | N: Nitrogen | lionSTEEL HRC | |
|---|---|---|---|---|---|---|---|---|---|---|
| Lohmann Niolox | 0.8 | 12.7 | 1.1 | 0.9 | 0.7 | 58 - 60 | ||||
| Uddeholm Sleipner | 0.9 | 7.8 | 0.5 | 0.9 | 2.5 | 0.5 | 60 - 62 | |||
| Uddeholm Elmax | 1.7 | 18 | 0.3 | 0.8 | 1 | 3 | ||||
| Bohler D-2 | 1.5 - 1.6 | 11-dic | 0.35 | 0.3 | 0.75 | 1 | 59 - 61 | |||
| Bohler M390 | 1.9 | 20 | 0.3 | 0.7 | 1 | 4 | 0.6 | 59 - 61 | ||
| Bohler K490 | 1.4 | 6.4 | 1.5 | 3.7 | 3.5 | 60.5 - 62.5 | ||||
| CPM MagnaCut | 1.15 | 10.7 | 2 | 4 | 2 | 0.2 | 60.5 - 62.5 | |||
| CPM M4 | 1.42 | 4 | 0.3 | 5.25 | 4 | 5.5 | 60.5 - 62.5 | |||
| CPM 3V | 0.8 | 7.8 | 1.3 | 2.75 | 61 - 63 |
Shop
